CMI Carrier Braces

CMI's Carrier Pipe Braces


Carbon Steel Carrier Pipe Braces - Model B-CS

Material Specifications

*Band and Risers* Band - 14 Gauge Riser - 12 Gauge Carbon Steel 10 Gauge if required	*Runner -* UHMW Polymer Plastic Runner Tensile psi (min) 75,000 Yield psi (min) 30,000 Brinell (max) Hardness 202

*Liner -* Polyvinyl Chloride Thickness - .090" (2.29 mm) Minimum Water Absorption - Maximum 1% Dielectric Strength - 1/8" (3.18 mm) thick 60,000 VPM Hardness - Durometer "A" 85-90	Tivar - 1000 Polyvinyl Chloride Thickness - .090" (2.29 mm) Minimum Water Absorption - Maximum 1% Dielectric Strength - 1/8" (3.18 mm) thick

*Welding* All risers are welded to the band by MIG Welding	*Coating* Coal tar with epoxy coating - 16 mils *Sizes* Available from 4" and larger carrier pipe

**Number of risers depend on size of pipe and number of spacers per joint Bands will be 8" or 12" as required




Stainless Steel Carrier Pipe Braces - Model B-SS

Material Specifications

*Band and Risers* Band - 14 Gauge Riser - 12 Gauge T-304 Stainless Steel 10 Gauge T-304 Stainless Steel if required	*Runner -* UHMW Polymer Plastic Runner Tensile psi (min) 75,000 Yield psi (min) 30,000 Brinell (max) Hardness 202

*Liner -* Polyvinyl Chloride Thickness - .090" (2.29 mm) Minimum Water Absorption - Maximum 1% Dielectric Strength - 1/8" (3.18 mm) thick 60,000 VPM Hardness - Durometer "A" 85-90	Tivar - 1000 Tensile Yield - D638 ASTM 3100 psi Ultimate Tensile - D638 ASTM 6200 psi Elongation at Break - D638 ASTM 300%

*Welding* All risers are welded to the band by MIG Welding All welds are passivated to protect the integrity of the pipe	*Assembly Hardware* T-304 Stainless Steel 3/8" - 18/2 1/2" 3/8" Hex Nuts *Sizes* Available from 4" and larger carrier pipe

**Number of risers depend on size of pipe and number of spacers per joint Bands will be 8" or 12" as required